美女裸体无遮挡永久免费网站-а√天堂资源官网在线资源-国产亚洲精品精华液-免费视频爱爱太爽了

Main disadvantages of side horizontal cold heading machine

Current location:Home  / News  / Day health information / Main disadvantages of side horizontal cold heading machine

Main disadvantages of side horizontal cold heading machine

date:[2022-09-17]     pk_hits:

The die arrangement of cold heading forming machine has two forms: one is vertical arrangement, and the overall structure of the machine tool is horizontal; One is horizontal arrangement, and the overall structure of the machine tool is horizontal. The side horizontal multi station cold heading machine is easy to operate and adjust. Workers can operate standing without bending, and can sit and observe the operation of the machine tool. It is more comfortable - the design concept of the side horizontal cold heading machine seems to focus on this advantage. Compared with its series of disadvantages, this advantage is insignificant.


五模五沖TW24B多工位冷鐓機


The main disadvantages of the side horizontal cold heading machine are:

1. The bed structure is asymmetric from top to bottom, left to right, which causes complex elastic deformation and poor overall rigidity.

2. The axial component of the upsetting resistance of each station is distributed on the vertical plane, and its resultant force deviates from the center line of the machine tool, that is, from the center of the connecting rod pin, producing a huge torque on the slider. This torque almost all acts on the slider guide rail, producing a great destructive force on the guide rail. How destructive is it? For example, for a cold upsetting machine with a nominal pressure of 1200 kN, the resultant force of the upsetting resistance can offset the centerline of the machine tool by up to 5 cm (when there is a station without a workpiece, the offset may be greater), and the torque acting on the guide rail is equal to 60 kN · m. If the length of the slider is 1.5 meters, this moment is equivalent to pressing a 4 ton weight on one end of the slider and lifting it with a force of 40 kN (equivalent to 4 tons) on the other end. It goes without saying that the slider and guide rail will have severe uneven wear, and the accuracy of the machine tool can be imagined.

3. Due to structural reasons, the slider guide must be raised, which further aggravates the friction between the slider and the guide.

4. In order to improve the friction conditions between the sliding block and the guide rail, the designer has to lengthen the sliding block, which increases the weight of the sliding block in vain, leading to the reduction of the stability of the whole machine.

5. The ejection mechanism cannot be unfolded on the same plane (longitudinal vertical plane) as the main transmission mechanism, which cannot achieve a compact design. As a result, the structure is complex and huge.

6. The clamp transmission mechanism has the same disadvantage; The complex structure of the clamp box is not commensurate with the uncomplicated functions it realizes.

7. When the workpiece gripped by the clamp is rotated and lowered, the workpiece is easily shaken and thrown off due to the influence of its own weight, especially the longer workpiece.

8. When the clamp (or scissors) of the upper station drops, the workpiece will fall down and may be pressed on the lower station to break the mold and clamp.

9. The height is too large, which blocks the workers' sight and worsens the working environment of the workshop.

10. It is difficult to assemble and disassemble the mold and lift it. From the middle and late 1960s to the 1970s and 1980s, and even the early 1990s, side horizontal cold heading machines became popular in China and gradually formed a series. However, due to the above "top ten crimes", the lateral horizontal cold heading machine finally cannot escape the fate of being eliminated.


Pingyang Tianwei Machinery Co., LtdFull system solutions for quality machinery manufacturers

All product pictures and publicity pictures of this website belong to us. No individual or organization is allowed to use them, and any embezzlement must be prosecuted.

Pingyang Tianwei Machinery Co., Ltd

Tel:0577-86266681Tel:0577-86125986mobile phone:13806699071E-mail:tianweimachine@126.comAdd: Haixi Industrial Park, Pingyang County, Wenzhou, Zhejiang

WeChat

Service hotline

13806699071

We warmly welcome your consultation, and we will provide you with satisfactory mechanical solutions

主站蜘蛛池模板: 午夜福利理论片高清在线| 亚洲日本欧美日韩中文字幕| 国产精品无码无卡在线观看久| 香蕉视频官网| 国产亚洲精品无码成人| 丰满人妻一区二区三区视频53| 青青草原亚洲| 成年女人免费v片| 特黄三级又爽又粗又大| 亚洲精品拍拍央视网出文| 久久精品免费一区二区三区| 欧美另类精品xxxx人妖| 好吊妞视频这里有精品| 国产成人亚洲精品无码av大片 | 欧美日韩精品一区二区三区高清视频| 被仇人调教成禁脔h虐| 国产精品无码av在线播放 | 日本边添边摸边做边爱| 99精品欧美一区二区三区| 欧美一性一乱一交一视频| 999zyz玖玖资源站永久| 亚洲va中文在线播放免费 | 亚洲精品无码mv在线观看| 色一情一乱一伦| 伊人久久大香线蕉亚洲五月天| 狠狠躁夜夜躁av网站中文字幕| 最新亚洲人成网站在线观看| 好吊妞国产欧美日韩免费观看 | 欧美重口另类在线播放二区| 国产精品自在欧美一区| 人妻无码久久一区二区三区免费| 色综合天天综合网国产成人网| 大肉大捧一进一出好爽mba| 中文字幕成人精品久久不卡| 国产国产人免费人成免费视频| 亚洲无线码高清在线观看| 亚洲欧洲日韩综合久久| av天堂电影网| 国产av一区最新精品| 日产精品一二三区| 欧美日本国产va高清cabal|